天游线路检测中心|首页注册

Instruments
CR-4 Steel Panels for Calibration of Salt Spray

CR-4 Steel Panels for Calibration of Salt Spray

For a salt spray test , the corrosivity speed of test specimen not only depend on the apparatus itself, such as salt fog uniformity, working-room temperature uniformity, but also depend on all kinds of paramters set by operator, such as volume of the collected solutionpH value of salt spray etc. In order to ensure the comparability of salt spray tests,  operator should use reference speciments to verify these influecing factors regularly.

Both ISO 9227 and ISO 7253 recommend use CR4-grade steel as reference specimens. These specimens are in accordance with ISO 3574 with an essentially faultless surface and a matt finish(arithmetical mean deviation of the profile Ra=0.8μm±0.3μm). For the three salt spray tests, the allowed range of mass loss of the steel reference speciments during verification of the corrosivity of the cabinet are as below:

A. Netural Salt Spray(NSS):After 48h test, the allowed range of mass loss should be 70g/m2±20g/m2

B. Acetic acid Salt Spray(AASS):After 24h test, the allowed range of mass loss should be 40g/m2±10g/m2

C. Copper-accelerated Acetic acid Salt Spray(CASS):After 24h test, the allowed range of mass loss should be 55g/m2±15g/m2

For ISO 7253《Paints and varnishes -- Determination of resistance to neutral salt spray (fog) 》, use six CR4-grade sepciments, after 96 hours exposure, the allowed range of mass loss should be 130g/m2±20g/m2 and no individual panel has a mass loss greater or less than 25g/m2 from the mean or from a value agreed by the interested parties.

CR-4 Steel Panels for Calibration of Salt Spray are according with ISO 3574:Carbon content ≤ 0.06%、 manganese content ≤ 0.45%、phosphorus content ≤ 0.03%、sulfur content ≤ 0.03%、Surface roughness Ra is 0.8 μm ± 0.3μm,and size is 150mm×70mm×1.0mm


Ordering Information:BGD 2309---CR-4 Steel Panels for Calibration of Salt Spray

                                                           (20 pcs/package)


Subject:
Company:*
Name:
E-mail:*
Country:*
Comments:
Verification Code:Click ChangeCan't see clearly. Change it?
 
Send message
Contact USMore

Biuged Precise Instruments (Guangzhou) Co.,Ltd

AddNO.15, Fuzhong Rd., Zhongxin Town, 

Zengcheng District, Guangzhou.China

Tel+86-20-32955999;+86-20-32955820

Fax+86-20-32955819 

E-mailjack@biuged.com

Website http://www.biuged.com 


Biuged Instruments Co.,Ltd.

Add:RM.310, NO.1, Sicheng Rd.,
Tianhe District, Guangzhou.China

Tel:+86-20-82169666

Fax:+86-20-32955818

E-mail:jack@biuged.com





Biuged Precise Instruments (Shanghai) Co.,Ltd

Add:Room 906, 9th Floor, Zhongcai Industrial Park, No.1111 Zhu Feng Road, Qingpu District, Shanghai, China

Tel:+86-21-59240298

Fax:+86-21-59249719

E-mail:xjx@biuged.com

  Biuged Laboratory Instruments (Guangzhou) Co., Ltd.   Guangdong ICP record number:11044672