天游线路检测中心|首页注册

Cone and Plate Viscometers

Most of paint and coatings are non-Newtonian fluids, its viscosity would show typical changes when applied with roller, brush or spray gun under high shear rates.

BGD 159 series Cone and Plate Viscometers designed by ISO 2884, ASTM D 4287 and BS 3900, can offer from 10,000S^-1 to 12,000S^-1 shear rates.

Features

◆ 7 inch touch screen with powerful human-computer interactive interface and rich information, easy to operate

◆ Interchangeable cones, simple to install and easy to clean

◆ Choice of shear rate. Standard speeds include 750 and 900 rpm to provide shear rate at 10,000 sec^-1.

◆ only need small sample amount（< 1 mL）, simplifies testing

◆ Build-in PT100 temp. probe

◆ ARM chip processor and Gigabit Ethernet port ensure higher data processing speed and rapid& stable data transfer

◆ New designed durable axle, anti-static shell and metal lifter

◆ Come with heating and temp. control system, can set sample plate temperature from -5°C to 120°C or RT+5°C to 250°C 

◆ Variety of viscosity units and auto switch between dynamic and kinematic viscosity

◆ Calibration by user：temperature and correction factor protected by password                       

How to choose your suitable Viscometer?

1. Specify one speed or shear rate if this is required for your method.

2. Indicate viscosity range.

3. Select the temperature range that best suits your application:  -5°C to 120°C (L Type) or RT+5°C to 250°C (H Type)

4. Choose from 10 cones for multiple viscosity ranges

BGD 159/1~3

  BGD 159/4

Main Technical Parameters

NOTE: 

1. "N"=Rotor Speed

2. Each Ordering Information has two different types according to temperature range：-5°C to 120°C (L Type) or RT+5°C to 250°C (H Type) 

THD Series---Low Temperature Thermostatic Bath
BGD 1600---Standard Oil（500ml）

BGD 1601---Low Viscosity Adapter（The 0th rotor and can measure 1.0 mPa.s sample）

BGD 1602---Small Sample Adapter（It’s specially designed for customers with small samples and requires only a quantity as small as 5～18ml；Sample cup is easily cleaned, installed, removed, and observed；Accurate data of shear rate and shear stress can be obtained for a minute analysis of the fluid characteristics of the sample；One-off sample cups are available）

BGD 1603---Mini Single Color Printer

BGD 1604---RTD Thermometer（-20℃～150℃）

BGD 1605---Thermoses（It has been designed to accurately measure the viscosity of heated oil, paraffin, asphalt emulsions, medicine, high polymer and similar liquid materials at high temperatures. It allows control of a sample’s temperature at a range of room temperature +300℃. It can program the intelligent thermostat and ensures its temperature fluctuation within 0.1℃. Sample dosage is as small as 10ml, and one-off sample cups are available. Standard type of SC4 spindle can be applied, which is easy to use）

BGD 1607---BGD 155 Viscometer data collection and graphing software（Automated data collection； resulting in viscometer graph, and recording measuring data each time；Allowing comparison of at most 10 history data；Output Excel documents）

BGD 1608---BGD 156-157-158 Viscometer data collection and programmed analysis software（Automated data collection and testing； resulting in viscometer graph, and recording measuring data each time；Allowing comparison of at most 10 history data；Output Excel documents；Programmable downloading, Offline working；Analyses data, draw charts and print）

BGD 159 Cone and Plate Viscometers.pdf