天游线路检测中心|首页注册

Intelligent Fineness of Grind Tester

The results of fineness of grind coming from different operators are always various. One of reasons is the power and speed are different when operator use scraper to drawdown sample. The second, there are always some subjective factors to judge particle number and distribution, especiall giving a testing result in 5 seconds or for small range gaues.    

BGD 246 Intelligent Fineness of Grind Tester is an intelligent instrument newly developed by our company. This instrument can not only automatically complete the standard scraping of the sample on the groove of the instrument, but also immediately take and save the pictures of the sample particles in the groove. And according to the regulations of the result reading of the relevant standards, it can automatically identify the scraper fineness value of the sample within 5 seconds, and also display the statistical chart of particle distribution.

The instrument can adapt to different specifications, types and sizes of fineness of grind gauges, and it is equipped with MODBUS TCP/RTU communication port. The data storage capacity is large, which can effectively solve the problem of poor repeatability and reproducibility of the results when the scraper fineness is detected in the current industry, and greatly improve the work efficiency.

Main Technical Parameters:

■ Measuring Range: 0~200μm （corresponding to a variety of scrapers, including 0~25μm, 0~50μm, etc., and the maximum is 0~200μm）

■ Scraping Speed：50mm/s~150mm/s (adjustable)

■ Measuring Accuracy：±5%     

■ Minimum Particle Resolution： 5μm~10μm  

■ Single Testing Time: ＜ 2 min.

■ Ordering Information：BGD 246---Intelligent Fineness of Grind Tester

BGD 246 Intelligent Fineness of Grind Tester.pdf