天游线路检测中心|首页注册

BGD 240 Automatic Flash Point Tester is designed by rapid equilibrium closed cup method. It can rapidly test flash point of coating, paint (water-based paint), varnish, lacquer base, adhesive, solvent, Fatty acid methyl ester（FAME）, chemical reagent, flavor, spices, solid chemical products, viscous chemical products, , air fuel oil, petroleum and related products.

It conforms to ISO 3679，ISO 3680，ASTM D 3278，ASTM D3828 etc

Characters

◆ Can detect the flash point at a specific temperature between -30 ℃ and 100 ℃ （BGD 240/1）or RT  to 300 ℃（BGD 240/2）at average rate heating.

◆ All functions are achieved through touch screen and digital display.

◆ Built in two test procedures：rapid balanced mode and average rate heating mode

◆ Various parameters, such as the heating mode, time, temperature and the average rate heating can be set by the user themselves.

◆ Planning board action, the decline of the ignition, the detection of flash point is done automatically.

◆ The gas ignition sources can be provided directly by the laboratory, you can also use the portable butane gas tank.

◆ Built-in cooling module is used to shorten the cooling time between the two tests.

      ◆ Amend barometric pressure automatically

Main Technical Parameters

■ Flash Point Temperature Range: For BGD 240/1：-30℃ to 100℃；For BGD 240/2： RT to 300℃

■ Tested Flash Point Temperature Accuracy: 0.5℃

■ Sample Volume: 2ml 

■ Heating Rate: Customize, quickest speed 5℃/min, longest duration 99min, highest temperature 100℃ （300℃）

■ Cooling Method: Built-in cooling module (without external cooler 0℃～100℃)

■ Output Interface: USB

■ Size: 460mm×330mm×350mm

■ Net Weight: 15 KG

■ Operate Temperature: 15℃～35℃

■ Power Supply: 220/240V，50/60Hz

■ Come with Accessories: 3pcs Special injector for high viscosity（thick）sample, Steam source regulation component，Silicone tube，Thermometer，O-Type Seal Ring（5pcs）

■ Optional Accessories: Flash point reference material （flash point value please consult）

■ Ordering Information:  

BGD 240/1---Automatic Flash Point Tester（-30～100℃）   

BGD 240/2---Automatic Flash Point Tester（RT～300℃）

BGD 1800/1---Stand oil of Closed Flash Point（40℃～50℃）

BGD 1800/2---Stand oil of Closed Flash Point（80℃～90℃）

BGD 1800/3---Stand oil of Closed Flash Point（100℃～110℃）

BGD 1800/4---Stand oil of Closed Flash Point（170℃～180℃）

Introduction

BGD 240 Automatic Flash Point Tetser.pdf